Home > News > Solutions > Electrical & electronics
 ELECTRICAL & ELECTRONICS



 

Switch
Housing and contact holder lock
Switches - disconnectors
Fastener for electronic device
Terminal block for neon sign transformers
Rotary contacts holder for motors
Thermostat Timer Housing
Body of device to monitor the level of organic liquids in train carriages
Transformer coil bobbin
Chips carrier tray

SWITCH
Application Sector: Electronic - Entertainment

Moulded part: Switch

Material: LATISTAT 36/MR-04

Project requirements:
• High mechanical resistance;
• Electrical conductivity/antistatic;
• High dimensional stability.


HOUSING AND CONTACT HOLDER LOCK
Application Sector: Electrical

Moulded part: Housing and contact holder lock

Material: LATIOHM 62-03 PD01 G/20

Project requirements:
• Electrical conductivity specific to the project;
• High stiffness;
• Excellent mechanical resistance;
• Excellent compound thermal resistance;
• Latiohm material has been chosen in substitution to
   a PA6 30% FV previously used thanks to its electrical    conductivity and its excellent mechanical properties;
• Material suitable to satisfy ATEX norm.

 SWITCHES - DISCONNECTORS
Application Sector: Electrical

Moulded part: Switches - disconnectors

Material: LATAMID 66 H2 G/25-V0CT1

Project requirements:
• Excellent surface finish;
• Good dimensional stability;
• Good mechanical properties;
• UL94-V0 self-extinguishing;
• GWT: 850°C;
• CTI: 400 V.

The manufactured product is tested as per norm IEC 947-1-3-4/EN 60947-1-3-5, requiring short circuit trials, mechanical and electrical life tests.

 FASTENER FOR ELECTRONIC DEVICE
Application Sector: Electrical

Moulded part: Fastener for electronic device

Material: LATAMID 66 H2 G/25 - V0KB1/ LATAMID 6 H2 G/30 - V0CT1

Project requirements:
• Self-extinguishing properties: UL94V-0 "Recognized"    at very low thickness High stiffness;
• Excellent mechanical properties;
• High thermal resistance;
• Excellent surface finish;
• The part complies with Telephony EBS & BELL    regulations.

 TERMINAL BLOCK FOR NEON SIGN TRANSFORMERS
Application Sector: Electrical

Moulded part: Terminal block for neon sign transformers

Material: LATAMID 66 H2 G/25-V0KB3

Project requirements:
• Very high mechanical properties: it has to hold the   transformer (max 10 kg);
• Thermal properties: 80°C in continuous;
• Flammability: UL94-V0 recognised at 2 mm -
   GTW 850° C;
• Excellent electrical resistance: CTI >= 600 V;
• Suitable to be used with metal inserts.

 ROTARY CONTACTS HOLDER FOR MOTORS
Application Sector: Electrical

Moulded part: Rotary contacts holder for motors

Material: LATILUB 66 - 01M G/30- LATILUB 66 - 20T G/20

Project requirements:
• Excellent self lubrication;
• Good mechanical properties;
• Good thermal resistance: test at 120°C for 1000    hours;
• Tight tolerances.

 THERMOSTAT TIMER HOUSING
Application Sector: Electronics

Moulded part: Thermostat timer housing

Material: KELON B FR H CET/30 - V0

Project requirements:
• Flammability: UL94V-0 at 1,5 mm GWT 960°C;
• Excellent dimensional stability;
• Ball test at 125°C;
• Serigraphy ability.

 BODY OF DEVICE TO MONITOR THE LEVEL OF ORGANIC LIQUIDS IN TRAIN CARRIAGES
Application Sector: Electrical

Moulded part: Body of device to monitor the level of organic liquids in train carriages (UK, France, Switzerland, Benelux, Scandinavia, Japan).

Material: LARTON K/30

Project requirements:
• Chemical resistance: the assembled component is    exposed to concentrated bleach (sodium    hypochlorite), ammonia, and other cleaning solutions    for a month at 60°C (a test which attempts to    recreate the worst conditions in train toilets);
• Tight internal tolerances of the moulded part for the    positioning of the electronic components;
• Good coupling between the base polymer and the    epoxy resin sealant.

 TRANSFORMER COIL BOBBIN
Application Sector: Electrical

Moulded part: Transformer coil bobbin

Material: LARTON G/40

Project requirements:
• Excellent thermal resistance: Class H (180°C)    according to IEC 85;
• Self extinguishing UL94 V0 recognised;
• Excellent surface finish without flashes.

 CHIPS CARRIER TRAY
Application Sector: Electronic

Moulded part: Chips carrier tray

Material: LATISTAT 52/7-02 MI/30

Project requirements:
• Excellent electrical conductivity: resistivity (surface    and volume) 102 Ohm;
• Excellent dimensional stability;
• High stiffness;
• Tight tolerances.
Contact:
email: marketing@it.lati.com
LATI Industria Termoplastici S.p.A.
Via F. Baracca, 7 21040
Vedano Olona (VA) - Italy
Tel. : +390332409111 - Fax: +390332409307

Copyright © 2007 - LATI Industria Termoplastici S.p.A. - Registered office: F. Baracca, 7 - I - 21040 VEDANO OLONA (VA)
Varese Company Register and Tax Code number 00214880122 - Share Capital € 3.818.400 i.v.
Tel. +39-0332-409111 - Fax +39-0332-409307 - E-mail: info@lati.com - VAT n. IT00214880122