Home > News > Solutions > Industrial
 INDUSTRIAL



 

Belt bushing
Special knife for textile weaver machine
Housing for a hart configurator
Hydraulic pump lid
Radio-axial roller bearing and thrust bearing
Paper Slot for photos developing device
Cable Clamp for textile machine
Brushless motor-shield for yarn winding machine
Tool-holder bars
Pinion tube
Flow valve for an industrial painting device
Paper ejector-shaft for scanner/printer

 BELT BUSHING
Application Sector: Industrial

Moulded part: Belt bushing

Material: LATIOHM 66-06 PD03 G/20

Project requirements:
• Compliance to the Atex standards: conductivity < =    10E9;
• Excellent load resistance;
• Excellent self-lubricating properties and wear    resistance;
• Excellent mechanical properties.

The LATIOHM 66-06 PD03 G/20 part has replaced the bushing, which was previously made in Polyamide with glass fibre, but it was not compliant to the Atex standards.

 SPECIAL KNIFE FOR TEXTILE WEAVER MACHINE
Application Sector: Textile

Moulded part: Special knife for textile weaver machine

Material: LARTON G/40

Project requirements:
• High mechanical properties;
• High stiffness;
• Excellent dimensional stability;
• Very tight tolerances;
• Thermal resistance at 120°C;
• Excellent chemical resistance to the agents used in    the textile sector;
• Low coefficient of linear thermal expansion.

The part in Larton G/40 has substituted the existing component in special chromium plated steel.

 HOUSING FOR A HART CONFIGURATOR
Application Sector: Industrial processes

Moulded part: Housing for a hart configurator

Material: LATIOHM 62-09 PD01 G/20-V2HF GREY

Project requirements:
• Electrical conductivity lower than 1 giga OHM;
• UL94-V2 rating;
• Excellent mechanical properties;
• High stiffness and impact resistance;
• Excellent chemical resistance to oil derivates;
• High strength for self-tapping screws;
• Light grey color.

 HYDRAULIC PUMP LID
Application Sector: Industrial

Moulded part: Hydraulic pump lid

Material: LARAMID G/15 NAT

Project requirements:
• Excellent mechanical properties;
• Excellent chemical and thermal resistance as the lid is    in contact with hot hydraulic oil at temperatures of    110-120°C. This performance must be guaranteed
   for many years;
• Excellent dimensional stability and very tight    tolerances;
• Very low moisture absorption.

 RADIO-AXIAL ROLLER BEARING AND THRUST BEARING
Application Sector: Mechanical

Moulded part: Radio-axial roller bearing and thrust bearing

Material: LATILUB 66-01M G/30

Project requirements:
• Elevated rigidity;
• Self-lubricating;
• Very tight tolerances;
• Good dimensional stability;
• Excellent resistance to lubricating oils and greases.

 PAPER SLOT FOR PHOTOS DEVELOPING DEVICE
Application Sector: Mechanics

Moulded part: Paper Slot for photos developing device

Material: LATILUB 87/28 - 20T

Project requirements:
• Self lubrificating (as little friction as possible on the    photo);
• Excellent dimensional stability;
• Tight tolerances.

The component in Latilub 87/28-20T, has substituted the metal

 CABLE CLAMP FOR TEXTILE MACHINE
Application Sector: Textile

Moulded part: Cable Clamp for textile machine

Material: LATAMID 66 H2 K/40

Project requirements:
• Very high stiffness;
• Self-lubricating;
• Low coefficient of friction;
• Tight tolerances;
• Good chemical resistance to the agents used in the    textile industry;
• Very low electrical resistivity.

 BRUSHLESS MOTOR-SHIELD FOR YARN WINDING MACHINE
Application Sector: Textile

Moulded part: Brushless motor-shield for yarn winding machine

Material: LATIOHM 66-06 PD03 G/20 BLACK

Project requirements:
• High electrical conductivity;
• Excellent mechanical properties;
• Excellent resistance to the chemicals used in the    textile industry;
• Good surface finish and excellent dimensional    stability.

 TOOL-HOLDER BARS
Application Sector: Industrial

Moulded part: Tool-holder bars

Material: LATILUB 87/28 - 12T G/20

Project requirements:
• Low coefficient of friction and wear;
• High rigidity;
• Excellent dimensional stability and very tight    tolerances;
• Good chemical resistance for printed circuits process;
• Excellent colourability.

 PINION TUBE
Application Sector: Textile

Moulded part: Pinion tube

Material: LATILUB 73/13 - 01M

Project requirements:
• Excellent wear resistance;
• Self-lubricating in absence of oils and grease;
• Low coefficient of friction;
• Good mechanical properties;
• Tight tolerances;
• Good fatigue resistance;
• Excellent chemical resistance in contact with
   chemicals used in textile sector.

 FLOW VALVE FOR AN INDUSTRIAL PAINTING DEVICE
Application Sector: Industrial

Moulded part: Flow valve for an industrial painting device

Material: LARTON GCE/600

Project requirements:
• Excellent chemical resistance to paints and solvents;
• Very good thermal resistance;
• Very high dimensional stability even at high    temperatures;
• Total absence of hygroscopicity.

 PAPER EJECTOR-SHAFT FOR SCANNER/PRINTER

Application Sector: Business Machine

Moulded part: Paper ejector-shaft for scanner/printer

Material: LATILUB 87/24UV-20T

Project requirements:
• Excellent self lubrication;
• Excellent dimensional stability;
• Very tight tolerances;
• Excellent mechanical properties;
• Self-extinguishing: UL94-V2 Recognised.

The shaft is then overmoulded with a thermoplastic elastomer.

Contact:
email: marketing@it.lati.com
LATI Industria Termoplastici S.p.A.
Via F. Baracca, 7 21040
Vedano Olona (VA) - Italy
Tel. : +390332409111 - Fax: +390332409307

Copyright © 2007 - LATI Industria Termoplastici S.p.A. - Registered office: via F. Baracca, 7 - I - 21040 VEDANO OLONA (VA)
Varese Company Register and Tax Code number 00214880122 - Share Capital € 3.818.400 i.v.
Tel. +39-0332-409111 - Fax +39-0332-409307 - email: info@lati.com - P.IVA IT00214880122